Under 1mm thick, designed for installation behind mirrors, to stop condensation when a shower or bath is in use.
Designed to stop condensation forming on your mirror when a shower or bath is in use.
The heater pads are stuck direct to the back of the mirror.
The Heater comes with 1mtr of cold lead flex which can be connected to it's own switch, or direct to your lighting circuit.
Mirror Size: 519 x 524mm
Total Watts: 55W
Voltage: 230V
The surface temperature of the mirror is limited to 45 degrees C
Simple installation by peeling off the self-adhesive backing and sticking it directly onto the back of the mirror.
When measuring for a Mirror Heater, always choose a panel that is 40mm smaller all around than the mirror itself.
Only to be installed in Zone 2 areas.
The Mirror Heater should not be cut or altered prior to installation. Once installed behind a mirror, the mirror should not be cut, drilled or altered as this could damage the Heater
The Mirror Heater can be connected to it's own switch, or direct to your lighting circuit
We recommend the connection to the mains is made by a qualified electrician.
No more steamed up mirrors
Simple to install
Less than 1mm thick
10 year guarantee
As the ambient room temperature rises, so will the surface of the mirror
Approved to International standards
Maintenance free